Alignment Tools

The Align Objects tool provides a number of options for accurately aligning the selected object to other objects in the selection, or to the available material.

Align to Material

The options in this section will align one or more selected objects within the material workspace defined when you setup your job (the white area in your 2D View).

Center in Material

This option moves the selected items to be positioned in the middle of the material. The short-cut key for this is F9.

Center in Material X only

Align items centrally in the material only moving them along the X axis so the vertical position will not be changed.

Center in Material Y only

Align items centrally in the material only moving them along the Y axis so the horizontal position will not be changed.

Align to Selection

The different items comprising your design in the 2D View can be aligned relative to one another using the following selection sequence:

  • Select the item/s you wish to align / move (use single or multiple selection options).
  • Hold the Shift key down.
  • Select the final item - this is the object that the rest of the selected items will be aligned to Click the required alignment option.

There are 7 alignment options for aligning the selection to the inside edge:

Align Center

Center selected items in the middle (both horizontally and vertically) of the last selected item.

Align Vertical Center

Align the selected items vertically centered to the last selected item.

Align Horizontal Center

Align the selected items horizontally centered to the last selected item.

Align Left/Right

test
test

Align the selected items to the left or right edge of the last selected item.

Align Outside Top/Bottom

test
test

Align the selected items on the outside top or bottom edge of the last selected item.

Space Selection

test
test

The final section is different from the preceding two. The tools here evenly space the selected objects either horizontally or vertically whilst maintaining the relative X or Y positioning of the items. The top and bottom items (for vertical spacing) or left and right items (for horizontal spacing) will remain in place and the other items will be spaced evenly between them.

Alternatively if CTRL is pressed the order of selection will be taken into account and the selected objects will be spaced evenly between the first and last object selected.

If Inside last vector is checked the items will be evenly spaced within the bounds of the last object that was selected.

Show common tools on drawing tab

If this option is checked, ✓ the most common alignment tools will be displayed on the drawing tab in their own section called Align Objects. The Alignment form can still be accessed from the original icon in the 'Transform Objects' section (or by pressing F10).